VIR GENERATOR UNIT U8794
Generation unit can be used for various simulation tests
instead of sensor output

Key Features

• As an inspection device of the ECU, it is ideal for generating
simulation signals of various sensors, inspection of electronic
parts, equipment maintenance
• DC voltage, DC current, and resistance simulation output possible
• In resistance generation, the voltage to be connected is measured,
the output current is calculated from the set resistance value, and
simulated output
• Used in combination with Memory HiCorder series
MR8740T (not available in other models)
• Insulation between each output channel and between channel and
chassis

Model No. (Order Code)

U8794For the MR8740-50
CE

Note: This module must be used with the Memory
HiCorder. Output cords are not included. Please
purchase them separately.

Basic specifications (Accuracy guaranteed for 1 year)

Output terminalNumber of channels: 8 (each channel is isolated), Connector: 25-pin D-sub
Max. rated voltage to earth: 25 V
Output itemsDC voltage, DC current, resistance (simulated output)
Output rangeDC voltage: -0.100 0 V to +5.300 0 V (setting resolution: 0.1 mV)
DC current:
5 mA range: -5.000 0 mA to +5.000 0 mA, Setting resolution: 0.1 μA
1 mA range: -1.000 00 mA to +1.000 00 mA, Setting resolution: 0.01 μA
250 μA range: -250. 00 μA to +250.00 μA, Setting resolution: 0.01 μA
50 μA range: -50. 000 μA to +50. 000 μA, Setting resolution: 0.001 μA
Resistance: 10 Ω to 1 MΩ, Setting resolution: 6 digits
Output accuracyDC voltage: 5 V range, ±0.035% of setting ± 800 μV
DC current:
5 mA range: ±0.050% of setting ± 4.0 μA
1 mA range: ±0.050% of setting ± 800 nA
250 μA range: ±0.050% of setting ± 200 nA
50 μA range: ±0.050% of setting ± 40 nA
OtherSelf diagnostic, switch output terminals, estimate target connection, cancel offset
Dimensions and mass106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 280 g (9.9 oz)
AccessoriesNone

For more information, click here

-->