FLYING PROBE TESTER FA1817

Detect Latent Failures in High Density Substrates Without Fail

The FA1817 is a fixtureless, dual-sided, bare board tester that provides superior
cost performance and quick inspection yield thanks to advanced probe movement
technology. Using a total of four arms, two in front and two in back, it is
capable of simultaneously testing both sides of the board, provides open via
detection via low resistance testing.

Model No. (Order Code)

FA1817	Vertical double sided

Installation area: FA1817 can inspect boards (610 × 510 mm)
of the same size as the conventional Model 1271, but the
installation area for the equipment is even smaller than
the conventional Model 1270 (inspection board size is
smaller than on the 1271), contributing to space saving
measures. In addition, a back door is available as an option,
supporting easier maintenance.

Key Features

• Optimization of probe movement reduces inspection time by up to 20%
• Reduce probe marks in combination with the latest probes
• Fault analysis using newly developed “Process Analyzer”

Specifications Overview

Number of arms	4 (top surface × 2, bottom surface × 2)
Mountable probes	1172 series, CP1072 series
Number of test steps	999,999 steps
Measurement parameters and measurement ranges	Resistance :	40.00 μΩ to 40.00 MΩ
	Insulation resistance :	1.000 kΩ to 100.0 GΩ
	Capacitance :	100.0 fF to 10.00 μF
	Leak current measurement :	1.000 μA to 10.00 mA
	High voltage resistance :	1.000 kΩ to 100.0 GΩ
	Capacitance insulation resistance :	1.000 kΩ to 10.00 MΩ
	Open test :	4.000 Ω to 4.000 MΩ
	Short test :	400.0 mΩ to 40.00 kΩ
Judgment range	-99.9% to +999.9% or absolute value
Overall probing precision	25 μm (Square), (Note: Restrictions on inspection conditions)
Probing pitch	80 μm (When using CP1072-01 probe, between L-R arm)
Measurement time	Max. 67 points/ s (X-Y movements of 0.15 mm, 4-arm simultaneous probing, when capacitance measurement)
Testable board size	Standard specification: 50 mm (1.97 in) W × 50 mm (1.97 in) H to 610 mm (24.02 in) W × 510 mm (20.08 in) H, Thickness 1.0 mm (0.04 in) to 3.2 mm (0.13 in) Fixed air type board (option): 50 mm (1.97 in) W × 70 mm (2.76 in) H to 610 mm (24.02 in) W × 510 mm (20.08 in) H, Thickness: 0.6 mm (0.02 in) to 6.0 mm (0.24 in)
Maximum testable area	604 mm (23.78 in) W × 504 mm (19.84 in) H
Board clamping	Board 2-side chuck method (with tension function)
Power supply	200 V, 220 V, 230 V, 240 V AC single phase (specify upon order), 50/60 Hz, Maximum power consumption: 3 kVA
Dimensions and mass	1500 mm (59.06 in) W × 1950 mm (76.77 in) H × 800 mm (31.50 in) D, (Excluding protruding parts), 1070 kg (37742.5 oz)

Preview Catalog: FLYING PROBE TESTER FA1817

Download PDF [1MB]

English

For more information, click here