HEAT FLOW SENSOR Z2012-01 to Z2017-01

Sensor with Thermocouple that can Simultaneously
Measure Temperature and Heat Flow

The model Z2012-01 to Z2017-01 add a K thermocouple to a heat flow sensor,
providing a single sensor that can measure both temperature and
heat flow. The flexibility enables you to measure even rounded objects
such as piping that could not be measured properly before. In addition,
you can measure objects that were impossible to isolate for measurement
before, for example the surfaces of small parts and narrow gaps.

Model No. (Order Code)

Z2012-01	S size, 1.5 m (4.92 ft) length
Z2015-01	S size, 5 m (16.41 ft) length
Z2013-01	M size, 1.5 m (4.92 ft) length
Z2016-01	M size, 5 m (16.41 ft) length
Z2014-01	L size, 1.5 m (4.92 ft) length
Z2017-01	L size, 5 m (16.41 ft) length

Use with Hioki Heat Flow Logger LR8432.

Key Features

• Built-in K thermocouple in heat flow sensor, simultaneous measurement of temperature and heat flow with a single sensor
• Increased work efficiency since heat flow sensor and thermocouple can be affixed in a single step
• Measure the movement and volume of heat energy with Model LR8432 Heat Flow Logger
• Waterproof heat flow sensor that can measure curved surfaces (Minimum radius of sensor curvature 30 mm (1.18 in))
• Isolation of heat generated and dissipated in automotive parts
• Evaluate the thermal performance of building materials
• Measure the energy efficiency of consumer electronics
• Study the impact of body heat
• Index temperature fluctuation in agriculture and civil engineering

Basic specifications

Models	Z2012-01, Z2015-01	Z2013-01, Z2016-01	Z2014-01, Z2017-01
Typical sensitivity	0.01 mV/W•m -2	0.04 mV/W•m -2	0.08 mV/W•m -2
Thermocouple	K type thermocouple, Responsivity 0.3 s
Operating temperature	Sensor part : -40 °C to 150 °C (-40.0 °F to 302.0 °F) Cable part: -25 °C to 120 °C (-13.0 °F to 248.0 °F)
Waterproof protection	IP06, IP07 (EN60529)
Internal resistance (including cable)	3 Ω to 500 Ω	3 Ω to 1000 Ω	3 Ω to 1500 Ω
Min. curvature radius	30 mm (1.18 in)
Compression strength	4 MPa
Thermal resistance	1.3 × 10 -3 (m 2·K/W)
Repeatable precision	±2 %
Sensor part dimensions	W: 10 mm (0.39 in)
	L: 9.1 mm (0.36 in)	L: 31.6 mm (1.24 in)	L: 54.1 mm (2.13 in)
	t: 0.25 mm (0.01 in)
Cable length	1.5 m (4.92 ft) (Z2012-01, Z2013-01, Z2014-01) 5 m (16.41 ft) (Z2015-01, Z2016-01, Z2017-01)

Catalog: HEAT FLOW SENSORS Z2012 Series

Download PDF [2MB]

English

For more information, click here