Capture High- to Low-Voltage Signals in a Single
Device! Rugged, Professional and Ready for the Field

Hioki Memory HiCorders are high-speed waveform monitoring and recording
devices that can simultaneously measure multiple quick-changing
phenomena due to complete isolation between channels and from each
channel to the ground. The MR8880 is a data acquisition (DAQ)
recorder built in with 4 analog channels that can accept direct
input of 600V, enabling measurements of 3-phase systems.

Model No. (Order Code)

MR8880-204ch, printer unit option, English model

Note: Input cords and Battery Pack are not included.
Purchase the cords appropriate for your application
separately. Printer Unit MR9000 is optional and sold

Key Features

• CAT III 600V isolation performance; directly measure a 480V power line
• 4 completely isolated channels let you simultaneously record data on a 3-phase power line plus have one extra channel
• Tough against harsh environments; -10°C to 50°C operating temperature range
• Built to withstand mechanical shocks and vibrations (ships standard with side protectors)
• Make settings easily with PRESETS function

How to Use Hioki Memory HiCorders: Measuring Current Waveforms

Watch this video to learn how to use the Hioki MR8880’s trigger function to definitively record the startup current when a motor is powered on. Pre-trigger settings let you capture details about the situation before and after the trigger is activated, and numerical data of the peak current waveform can be easily identified using the built-in cursor functions.

How to Use Hioki Memory HiCorders: Recording PLC Timing

Watch this video to learn how to use logic probes to analyze the timing of control signals via the 8 logic and 4 analog channels built-in to the Hioki MR8880. Based on the AND / OR settings, the MR8880’s trigger will activate with respect to the specified logic level. Pre-trigger settings let you capture details about the situation before and after the trigger is activated.

How to Use Hioki Memory HiCorders: Recording Voltage Drop During a Power Outage

Watch this video to learn how to easily detect when a voltage drop on the commercial power supply will occur by using the trigger function on a Hioki Memory HiCorder and setting the peak waveform level as the voltage level. The waveforms can also be automatically printed onsite and saved to portable external media for later analysis on a PC.

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Number of channels4 analog channels + 8 logic channels (standard)
Note: Isolated analog channels, isolated input and frame, logic has common GND
Measurement ranges (10 div full-scale)4 channels of voltage measurement; mode switchable between instantaneous waveform or RMS value, 10 mV to 100 V/div, 13 ranges, resolution: 1/640 of range
RMS value mode: 30 Hz to 10 kHz, Crest factor: 2
Max. rated voltageBetween terminals: 600 V AC/DC, Between terminal to earth: 600 V AC/DC CAT III; 300 V AC/DC CAT IV
Frequency characteristicsDC to 100 kHz (±3dB)
Time axis (High-speed function)100 µs to 100 ms/div, 10 ranges, Sampling period: 1/100 of range
Recording intervals (Real-time function)100 µs to 1 minute, 19 selections (simultaneous sampling in all channels)
Measurement functionsHigh-speed function (high speed recording)
Real-time function (actual time recording)
Memory capacity14-bits × 1M-words/ch (1 word = 2 bytes)
Removable storageCF card slot ×1 (Up to 2 GB), USB 2.0 memory ×1
Printing[Printer unit is option] 112 mm (4.41 in) × 18 m (59.06 ft), thermal paper roll, Recording speed : 10 mm (0.39 in)/sec
Note: Printing is not supported when using alkaline batteries
Display5.7-inch VGA-TFT color LCD (640 × 480 dots)
Displayable languagesEnglish, Japanese, Chinese
Communication interfacesUSB 2.0 mini-B receptacle × 1; Transfers files from the installed CF card or USB memory stick to a PC when connected, and External PC control
Power supplyAC adapter Z1002: 100 to 240 V AC (50/60 Hz), 45 VA (include AC adapter, when Real-time recording), 107 VA (include AC adapter, when Real-time recording and printing)
Battery pack Z1000: AC adapter has priority when used in combination with battery pack, recharge with AC adapter 3 hours, Continuous use 3 hours (with back-light ON)
LR6 (AA) alkaline batteries ×8, Continuous use 40 minutes, (with back-light ON, cannot be used with the Printer unit)
DC power supply: 10 to 28 V DC (cable available by special order)
Dimensions and mass205 mm (8.07 in)W × 199 mm (7.83 in)H × 67 mm (2.64 in)D, 1.66 kg (58.6 oz) (with the Battery pack installed)
When printer is combined - with main unit: 303 mm (11.93 in)W × 199 mm (7.83 in)H × 67 mm (2.64 in)D, 2.16 kg (76.2 oz) (with the Battery pack installed)
AccessoriesInstruction manual ×1, AC adapter Z1002 ×1, Alkaline battery box ×1, Strap ×1, USB cable ×1, Application disk (Wave viewer Wv, Communication commands table) ×1

LabVIEW and MATLAB support

Compatible modelsLabVIEWMATLAB script
Catalog: MEMORY HiCORDER MR8880Download PDF  [4MB]English

For more information, click here