Output the signal the recorder measured, which is ideal
for abnormality simulation test
The Arbitrary Waveform Generator Unit U8793 is a plug-and-play module | Model No. (Order Code)
Note: This module must be used with the Memory HiCorder. |
---|
Key Features • Output arbitrary waveform signals up to 2 channels |
---|
Output terminal | Number of channels: 2, SMB terminal (Output impedance: 1 Ω or less) Max. rated voltage to ground: 33 V rms AC or 70 V DC |
---|---|
Output voltage range | -10 V to 15 V (Amplitude setting range: 0 V to 20 V p-p, Setting resolution: 1 mV) |
Max. output current | 10 mA (Allowable load resistance: 1.5 kΩ or more) |
Function generator | DC, Sine wave, Square wave, Pulse wave, Triangular wave, Ramp wave, Output frequency: 0 Hz to 100 kHz |
Arbitrary waveform generator mode | Waveforms measured by MR8847A, etc., generated by Hioki Model 7075, PW3198, or SF8000, CSV waveforms D/A refresh rate: 2 MHz (using 16-bit D/A) |
Sweep function | Frequency, Amplitude, Offset, Duty (Pulse only) |
Program function | Max. 128 steps (Number of loops for each step, Number of total loops) |
Other | Self-test function (Voltage), External input/output control |
Dimensions and mass | 106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 250 g (8.8 oz) |
Accessories | None |
Catalog: Waveform Generator System U8793,MR8847A | Download PDF [2MB] | English |
For more information, click here