Meeting Ever Increasing Demands for Greater Analytical Power,
Faster Testing Speeds and Reduced Costs
Designed specifically for package board testing, the FA1811 achieves both high-precision
contact with a total probing precision of 10 μm, and a testing speed rivaling generic
flying probe testers to meet ever increasing demands for greater analytical power,
faster testing speeds and reduced costs.

Model No. (Order Code)

FA18114096 channels built-in

Testing requires either the CP1165-11 or the E4101.

Key Features

• Achieve both high precision contact and high-speed probing in a space of 10 μm.
• Double test method delivers an operation rate of 100%.
• Full-net insulation continuity test using resistance: x10 max. speed*
• High-speed test using capacitance: x2 max. speed*
(* Compared to the double-sided 4-arm FLYING PROBE TESTER)

Specifications Overview

Number of arms2 (Upper: 2)
Mountable probesCP1073 series
Measurement parameters and measurement rangesResistance measurement :400.0 μΩ to 40.00 MΩ
4.000 Ω to 4.000 MΩ (T)
Capacitance measurement :100.0 fF to 10.00 μF
MLCC measurement :100.0 nF to 100.0 μF
Insulation measurement :1.000 kΩ to 100.0 GΩ
1.000 kΩ to 250.0 MΩ (T)
Capacitor insulation measurement :1.000 kΩ to 10.00 MΩ
High-voltage resistance measurement :1.000 kΩ to 100.0 GΩ
1.000 kΩ to 250.0 MΩ (T)
Leak current measurement :1.000 μA to 10.00 mA
Continuity :400 mΩ to 1.000 kΩ
Open measurement :4.000 Ω to 4.000 MΩ
Short measurement :400.0 mΩ to 40.00 kΩ
(T): When measuring via the TEST FIXTURE
Judgment range-99.9% to +999.9% or absolute value
Total probing precision10 μm (Square)
Probing pitchMin. 40 μm (when using CP1073-01)
Supported range of board thicknesses for clampingFollow option on BGA side
Probing area75 mm (2.95 in) × 75 mm (2.95 in)
Power supply200 V AC ±10% (three phase) 50/60 Hz (200 V, 220 V AC: specified upon order)
Maximum power consumption: 5 kVA
Dimensions and mass1300 mm (51.18 in) W × 1670 mm (65.75 in) H × 1700 mm (66.93 in) D (Excluding protruding parts), 2000 kg (70,546.7 oz)

TEST FIXTURE CP1165-11 Specifications

Board dimensionsSquare 10 mm (0.39 in) to Square 80 mm (3.15 in)
Supported range of board thicknesses for clamping0.1 mm (0.004 in) to 5.0 mm (0.20 in)
NotesDesigned for each board
Board clampingHolder, shutter, and vacuum pump required separately
Supported pad diameter200 μm or larger, 300 μm or larger when using Kelvin probe
Max. number of pins8192


Board dimensions50 mm (1.97 in) W × 90 mm (3.54 in) D to 105 mm (4.13 in) × 250 mm (9.84 in)
Supported range of board thicknesses for clamping0.1 mm (0.004 in) to 0.8 mm (0.031 in)
NotesTo accommodate the entire range of substrate thickness, it is necessary to replace the spacer for substrate thickness adjustment.
Board clampingVACUUM PUMP E4106 required separately
Catalog: FLYING PROBE TESTER FA1811Download PDF  [1MB]English

For more information, click here